4D Systems uCAM-III Serial Camera Module

Author : 4d systems Published Time : 2017-05-26
4D Systems uCAM-III (microCAM-III) Serial Camera Module is a highly integrated, low-power camera module for embedded imaging applications. The uCAM-III is the revised version of the uCAM-II. This revised module is backward compatible, interchangeable, and provides greater control of complex imaging. 4D Systems uCAM-III attaches to any host system that requires a video camera or a JPEG-compressed still camera. The uCAM-III allows image output in both RAW and JPEG format. User commands are sent using a simple serial protocol. The uCAM-III module comes with a 5-wire connector and a standard 56° angle lens. A 76° or 116° lens option is also available.

Features

UART: ≤3.68Mbps for JPEG still picture or raw image transferOnboard EEPROM for command-based interface to external host via TTL serial linkOnboard 128KB of RAM to capture complex images without automatic downsamplingBuilt-in color conversion circuits for 16-bit CrYCbY, 8-bit gray, 16-bit RGB, or standard JPEG imagesRAW/JPEG CODEC and on-board VGA color sensor for various resolutionsBuilt-in down sampling, clamping and window circuits for VGA, QVGA, or 160x120 image resolutions
4d systems Newest

4D LCD 70800480 7.0" TFT Liquid Crystal Displays are color active matrix LCD modules that incorporate an amorphous silicon Thin Film Transistor.

Date: 2019-09-24

4D LCD 35480320 3.5" TFT Liquid Crystal Displays are color active matrix LCD modules integrating an amorphous silicon thin-film transistor.

Date: 2019-09-24

4D LCD 50800480 5.0" TFT Liquid Crystal Displays are color active matrix LCD modules that integrate an amorphous silicon Thin Film Transistor.

Date: 2019-09-24

4D LCD 43480272 4.3" TFT Liquid Crystal Displays are color active matrix LCD modules incorporating an amorphous silicon Thin Film Transistor.

Date: 2019-09-24

4D Systems SK-IoD-09TH Starter Kit provides the necessary hardware to try out all the features of the IoD-09TH display module.

Date: 2018-02-22

4D Sytems 4D-UPA Universal Programmer is an essential hardware tool to program, customize, and test the IoD-09TH display module.

Date: 2018-02-22

4D Systems IoD-09TH Display Module features a full-color 0.9-inch TFT LCD display and is powered by WiFi-enabled ESP8266. Now available at Mouser.

Date: 2018-02-20

BeagleBone Black LCD Capes by 4D Systems provide a TFT LCD primary display for the BeagleBone Black and available with touch or without.

Date: 2017-08-23